RATTMMOTOR CNC 1610 PRO 3 Axis GRBL Control DIY Mini CNC Router Machine Kit with Offline Controller and 14pcs ER11 Collets CNC Engraving Milling Machine for Cutting Wood Plastic Acrylic PVC PCB

Product Description

WHAT’S IN THE PACKAGE

1 x 1610PRO DIY MINI CNC Router Machine Kit
1 x Power Supply
10 x Tip 0.1 mm, 20° 3.175 mm Drill Bits
4 x Plate Clamps
1 x English Manual
1 x 4GB USB Flash Drive
1 set Allen Wrench
1 x CNC Offline Controller
1 x 14pcs ER11 Collets

Parameters:

Dimensions: 30*26*25cm
Working Area: 18*10*4.5cm
Material: PA6 Nylon + Aluminum profile
Power supply : 24V 5.6A power adapter (input voltage 110-240V)
Stepper motor: Nema17 stepper motor 1.3A, 0.25N.m
Control system: grblcontrol, USB interface

About Machine Installation

Although this mini engraving machine is shipped in bulk, it is simple and easy to install. The package is equipped with an English installation and operation manual, so users do not have to worry about not installing the machine.
In addition, it should be noted that this is only a mini machine suitable for novices or DIY enthusiasts, and cannot be compared with professional industrial machines

Accessories

Equipped with 10pcs Drill Bits & 14pcs ER11 Collet.

With 10pcs 3.175mm Drill bits
With 14pcs ER11 Collet, Size of each collets: 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 3.175mm(1/8″)

Applicable Engraving Material

CNC 1610 PRO machine can not only engraving wood/plastic/acrylic/ pvc/pcb/carbon fiber/density board and so on, but also soft metal like copper, aluminum and the similar materials. Howerever, harder materials cannot be engraved such as glass, hard metal, jade, ect.

GRBL Software

First install Win7/ win10 under the support system, the re-install or exit th anti-viirus software and re-install. ( We cannot guarantte 100% support for win10. If the user cannot install the driver on the win10 system, please contacte uss to solve it.

New Fuction

Add the X/Y/Z axis limit switch function, which means that the machine can automatically stop moving when the X/Y/Z axis moves beyond the machine stroke.

Add the emergency stop button function. When the engraving machine is working unusually, you can press this button to stop working immediately.

Advantages:

Add energency stop button interface.
Increase optocoupler isolation: this spindle drive increase the optocoupler isolation, which makes the controler generate less heat and the spindle speed adjustment is more safer.
Optimized the X/Y/Z limit port, making wiring and operation easier.
Improved USB interface: The original USB interface is patch soldering, transport collision and improper use, easy to drop, now changed to plug-in, very strong.
Add the power switch button, more safety in the process of using the machine.

More Fuctions

Support : Supprt emergency stop, X/Y/X axis limit switch, offline controller, probe,ect.
Enhanced spindle drive, can support up to 20,000 rpm spindle motor.
Add the outer casing, not only protect control board in transit, to avoid short circuit problem during use.
Cancel the drive module,use integrated imported stepper motor drive,with short circuit protection,and integrated heat dissipation aluminum alloy.
Add the low noise fan port to force heat dissipation.
Add offline recognition,can insert offline modules and computers at the same time. Offline will automatically identify if there is computer control.

Offline Controller Features

Support SD card and TF card at the same time, standard capacity 1G
With the controller, you can directly control the CNC router without connecting it to your computer.
After inserting the file into the SD card,the engraving file can be directly identified.
Connect the controller via USB wire to your computer and save the file directly.
Connect it to GRBL controller board, you can control the CNC router machine directly.

GRBL Offline Controller

Main Page

1) Ctrl: Machine Control; 2) File: Use the Gcode file; 3) Press [Y+] [Y-] to select; 4) Press[Ok] to Enter.

Control Page

1) X± Y± Z±: Moving Axis; 2) OK/Spindle: Spindle ON/OFF; 3)Exit/Step: Change Step/Exit (long press

File Page

1) Press [Y+] [Y-] to select file; 2) Press [Ok] to Enter; 3)Press [Ok] to begin if you are ready; 4) Note: Long press [Exit] to stop machining

【Upgrade Version CNC 1610 PRO】Frame size: 30x26x25CM. Working area:18x10x4.5CM. Material: Aluminum Alloy. Spindle: 775 spindle motor (12-24V) 24V:10000r/min（with14pcs ER11 collets）. Stepper motor: 42 stepper motor, 12V, phase current 1.3A, phase resistance 2.1 ohms, torque 0.25N.m
【Simple Assembly/Use】This mini cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and USB flash drive of all the files.
【Applicable Engraving Material】CNC 1610 PRO machine can not only engraving wood/plastic/acrylic/ pvc/pcb/carbon fiber/density board and so on, but also soft metal like copper, aluminum and the similar materials. Howerever, harder materials cannot be engraved such as glass, hard metal, jade, ect.
【GRBL Control Board/Software】This machine can be controlled by Grblcontrol/Candle software after connecting the control board to a coumpter via USB port. The control board is equipped with a fan to force heat dissipation, also has more fuctions such as support spindle PWM speed, limit switch, tool setting, steering gear.
【CNC Offline Controller】This machine can be controlled simply by the offline controller without connecting it to a computer. Support SD card and TF card at the same time, standard capacity 1G. After inserting the file into the SD card,the engraving file can be directly identified.