OLSON SAW SC91222BL Scroll Saw Sander with 1/4-Inch Wide 220 Grit, 4-Pack

Scroll Sander sanding belts easily smooth the edges of scroll saw projects in wood, plastic, metal and composites. These fabric-backed belts have molded polycarbonate ends for attaching to most scroll saws that take 5″ blades. Scroll Sander belts rapidly remove bumps, burns and feathering and correct wandering from a cutting line. They also work great on curves, concave or convex edges and can reach into intersections. Made in USA. Plain end and various sandpaper grits are available.
Special notes: Fits most 5″ scroll saws that take Pin End blades. Modifications may be required to throat insert or table opening depending upon width of sander used. Be sure to check yor
table/throat plate opening before purchasing sanders. DeWalt & Excalibur Scroll
Saws only accept the 1/4″ sanders unless you drill the table hole larger.
Dremel 1670, 1671 & 1680: use pin end sanders. Remove nub of plastic at gate to fit into clamp, if necessary. Delta: use side mount, cut table insert to fit sander, or remove table insert.
Ryobi SC 160: use pin end sanders.
Hegner: use pin end sanders.
Does not fit RBI, Reliant, or Moto-Shop.
Plain end sanders fit most conversion kits for mounting plain end blades on pin end scroll saws.
sandpaper
Made in the USA
Scroll Sander sanding belts easily smooth the edges of scroll saw projects in wood, plastic, metal and composites
These fabric-backed belts have molded polycarbonate ends for attaching to most scroll saws that take 5″ blades
They also work great on curves, concave or convex edges and can reach into intersections
Item Package Dimension: 2.0″ L x 8.5″ W x 1.0″ H
For Saws that take pin-end blades
Made in USA