Mist Coolant Lubrication Spray System, Engraving Machine Metal Cutting Fluid Cooling Sprayer with Quick Insertion Diameter 8mm Air Pipe for CNC Lathe/Milling/Drill Machine

Specifications:

Features:
Name: Engraving machine cooling spray
Material: Plastic + Metal + Copper
Size:
– Whole Length: About 1.5M
– Throttle Diameter: About 8mm / 0.31in
– Cooling Tube Length: About 350mm
Features:
– Suitable for high speed cutting and cooling.
– Extend the live of the machine, update the precision of processing.
– Decrease the fee of the operation and effect of process.
– Can decrease the liquid waste which influence the circumstance.
– Can save the cooling liquid in the range of 80%, good cooling effect.
– Advantage: Cutting, drilling, tapping, cooling and lubricate.
Notice:
– Must use the clean liquid.
– Do not use the corrosivity liquid.
– The out put air pressure range should be at 5-7KGF / CM2
– The liquid viscosity should be below 68cST.
Package Weight : 174 G / 6.14 Ounces
Package Dimensions (L*W*H) : 170*125*20 MM / 6.69*4.92*0.79 Inches

Package Include:

1 x Coolant Spray System
Whole Length: About 1.5M; Throttle Diameter: About 8mm / 0.31″; Cooling Tube Length: About 350mm / 13.78in. Set multi function all in one, cooling, lubrication and blowing the metal chips.
Can save the cooling liquid in the range of 80%, good cooling effect. Can decrease the liquid waste which influence the circumstance.
Extend the live of the machine, update the precision of processing. Decrease the fee of the operation and effect of process.
Great for CNC Lathe Milling Drill Machine. Usually used in lathe, milling, grinding, cutting, drilling, boring, cooling and lubricate, and tapping processing.
In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2