DC12V Deadbolt Electric Drop 5 Lines Electric Bolster Lock Narrow Deadbolt with Time Delay LED Display for Door Entry Access Control Time Open Wire (Power Off Lock)

Specification:
Item Type: Electric Deadbolt
Material: Aluminum Alloy
Working Voltage: DC12V
Working Current: Instantaneous starting current 1000mA, working current 120mA
Congratulation of open door: the negative pole of the black wire is mated with the orange wire
LED display: indication of the state of the bolster, red light when the bolster is retracted, green light when the bolster is disconnected
Lock delay: 0 -3-6-9 seconds adjustable
size: Diameter 12.8 mm/0.50 in. Stainless steel , protruding length 15 mm/0.59 in
Installation Instructions:
1. Please read this manual in detail before use, check whether the accessories are complete, and pay attention to the wiring method and installation precautions.
2. This product is composed of the lock body and the door valve plate, the circumferential distance between the door valve plate and the electric lock should not exceed 8mm during installation, so as to avoid induction Insufficient magnetic field, pay attention to the lock tongue corresponding to the door. Valve plate hole.
3. The electric lock wiring is led by red, black, orange, green, white, five colors. The red wire is connected to the positive pole of the lock (+), the black wire is connected to the negative pole of the lock (-), the green line and the white wire are the door signal, the white line is the common end (COM), the green line is normally open (NO), the orange line is the door open contact line, and the black line can be connected at the same time, and the door button can be connected.<4. Lock delay setting, a total of four setting methods, 0-3-6-9 seconds adjustable. 10 x Screw
2 x Gasket
1 x Metal Patch
1 x Iron Sheet
[Electric Floor Lock] Low temperature electric lock, the electric lock supports DC12V input, 120mA working current, 4 kinds of adjustable delay time: 0-3-6-9 seconds. This electric lock has lock cylinder operation detection LED light display and door detection signal output contact.
[Aluminum Alloy Material] The electrical socket locks are made of aluminum alloy material, strong, , impact resistant and wear resistant. Not easy to damage, fine workmanship, direct screen printing, and strong. It can be applied to wooden doors, glass doors, metal doors, fire doors, etc.
[Delay Function] Electric deadbolt swing with a delay-to-close function, it will lock until the door completely stops moving, instead of locking instantly, smart and effective protection of the door and lock from damage.
[Anti-Pry Function] The electric mortise lock is equipped with a lock cylinder work detection LED light display and door detection signal output contacts, solid structural design, strong anti-pry ability, strengthen the security of the lock the door.High strength and long life.
[Parameters] The electric door lock is made of stainless steel, the latch diameter is 12.8mm, the protruding length is 15mm, the aluminum alloy frame is strong and .Suitable for office type applications, light color design works with most metal door frames, unlimited mounting orientation.