Drill Press Return Spring, Quill Spring Feed Return Coil Spring Assembly, 2.2Ft Long, 35 x 6 x 0.7mm 2PCS

Specification:
Material : Spring Steel (60Si2Mn)
Finish : Blackening
Material Thickness : 0.7mm
Material Width : 6mm
Spring OD : 35mm
Expand Length : 680mm/26.8inch
Inner Mounting Type : Hook
Outer Mounting Type : Hook
Package Content :
2 x Drill Press Spring
Description:
1.The drill press quill return spring is good replacement for many existing quill spring drill presses, this is the chrome housed spring that returns the quill to the top after you have completed drilling.Used to all kinds of vacuum cleaner coil spring, volume tube coil spring, coil spring and so on.
2. Blackening, the performance of the product form oxide film, isolate the air, rust.
3.Pay attention to when installing springs. Do not loosen the wire of fixed springs! When installing, install the spring with a fixed wire directly into the spring , and the wire will slide out.
Expand Length : 680mm/26.8inch ; Spring OD : 35mm ; Material Width : 6mm ; Material Thickness : 0.7mm
Inner Mounting Type : Hook; Outer Mounting Type : Hook
This is the chrome housed spring that returns the quill to the top after you have completed drilling.Used to all kinds of vacuum cleaner coil spring, volume tube coil spring, coil spring and so on
Blackening, the performance of the product form oxide film, isolate the air, rust
Pay attention to when installing springs. Do not loosen the wire of fixed springs!