Big Horn 14339 Band Saw Replacement Tire for 16 Inch Wheel – Rep 419960940002

These premium quality bandsaw tires are made slightly smaller then wheel diameter to provide a tight fit. Tire may be trimmed to fit narrower wheels . Note: Always keep tires clean with Bandsaw Blade Cleaner. This will improves tire life and also help your blades to last longer.. Features: These tires do not dry out, therefore, they will not crack, peel or harden like rubber tires do They hold so tightly to the wheel you wont need to glue them down. Colored bright orange for easier inspection Specifications: Diameter : 16″ Width : 1″ Thick : 1/8″ Steps to Install: Remove wheel from saw, This greatly eases installation of the tire. Take old tire off wheel by prying it off with a flat bladed screwdriver, being careful not to damage wheel. Wash and clean wheel thoroughly making sure that the face of the wheel where the new tire will fit is free of any bumps or pitch built-up that could cause a high spot on the tire when installed. Hook new tire in groove and use a wooden dowel to roll the tire onto the wheel. Roll dowel around wheel under tire a couple of complete turns to equalize tension on tire. Remove dowel being careful not to get fingers pinched when the tire snaps into groove. Install wheel back on saw in same location as before. More Information Model# 14339 UPC 766565143391 WARNING California Proposition 65 Brand Big Horn
These tires do not dry out, therefore, they will not crack, peel or harden like rubber tires do
They hold so tightly to the wheel you wont need to glue them down. Colored bright orange for easier inspection
These premium quality bandsaw tires are made slightly smaller then wheel diameter to provide a tight.
Note: Always keep tires clean with Bandsaw Blade Cleaner. This will improve tire life and also help your blades to last longer.