4″ Mini Table Saw Portable Small Hobby Chop Saw Cutting Machine Adjustable Angle 0-45° Miter Saw 9000r/Min Woodworking Mobile Bench Saw for Wood, Aluminum Alloy, Soft Metal, Iron Sheet

I. Precautions for Safe Use
Warning: Please do not touch the running grinding wheel with your hand to avoid injury.
1. It is strictly forbidden to immerse the machine in water.
2. Private modification is strictly forbidden to cause unnecessary damage.
3. Working time: Please operate strictly following the rated working time, each use shall not
More than two hours, more than one and a half hours of continuous work, must stop fifteen minutes
clock, wait for the motor to cool down before working.
4. This product can not be directly connected to household electricity, you must use the power converter to convert the motor
Can use 12-24v electricity before use.
5. Children using this product must have an adult responsible for their safety, for them to
Supervision or guidance related to the use of the machine. Children should be watched to ensure that they do not
play with the product.
6. When using this machine, do not touch the running saw blade with your hands to avoid injury.
7. If this product is not used for a long time, please put it in a dry place to avoid rusting.
II. Product Parameters
Motor Double shaft 795 motor Motor voltage DC12V-24V
Machine applicable voltage 110V-240V Power 96W
Rotation speed 4000-9000rpm No-load decibel about 80
Size 150*180*110mm No-load temperature 20-45 degrees
This machine is only suitable for cutting materials with a thickness between 0-29mm.
III. Operating Instructions
When using this product for the first time, please ensure that the machine is connected to the power cord and operating properly.
All accessories to be used must be installed in the case of power failure.
Install the Saw Blade
1. Find the place where the saw blade is installed.
2. Grasp the belt by hand, then use a wrench to turn the screws on the saw blade mount.
3. Remove the spacer (if the inner hole of the saw blade is 20, you may not remove it).
4. Align the saw blade with the mounting point.
5. Put the saw blade in place.
6. Use the wrench to retract the locking screw, the saw blade installation is completed.
★【High Speed Saw Blade】This Mini Table Saw is a mini benchtop mounted cut-off saw with high-speed steel blade for cutting soft metal, wood, plastic, acrylic, bamboo material, handmade, ABS board, electric board materials, etc.
★【Angle Adjustment】From 0° to 45°, realize multi-angle cutting free control, can meet your multi-angle cutting and polishing. 26-29mm cutting thickness, the ideal cutting tool for handcraft.
★【Easy to Carry】Lightweight and easy to carry You could not miss this mini table saw for crafts, you could DIY at home, anywhere you like with this table saws.
★【Powerful】The motor can use strong power for a long time and easily cut all kinds of soft materials.
★【Customer Service】: We have been working hard to provide better service and quality for our customers, which is our goal. If there is any problem with our products. Please contact us in time.