4″ Mini Table Saw, Portable Miter Saw, Hobby Table Saw Bench Electric Cutting Machine, Metal Wood Glass Cutting Sawing Machine for DIY Handmade Woodworking Crafts, 3 Blades

Specifications

Color: Yellow+Black
Material: Aluminum Alloy, Pig Iron and Rubber
Mounting Type: Floor Standing
Assembly Required: Yes
Motor Type: DC Motor
Power: 90W
Horse Force: 1/8HP
Voltage: 110V, 60Hz, 0.9AMPS
Speed: 4500RPM
Plug Type: US Standard
Power Source: Corded Electric
Number of Items: 1
Depth of Cut: 1.6cm / 5/8″
Table Size: 190*142mm/7.48*5.59in
Saw Blade Diameter: 10cm/4″
Arbor Diameter: 12mm/0.47″
Non-metallic Cutting Depth: 15mm/0.59in
Cutting Depth for Soft Metals: 13mm/0.512in
Cutting Depth for Hard Metals: 4mm/0.157in
Product Size: Approx. 190*142*116mm/7.48*5.59*4.57in

Package Included
1* Table Saw
3* Blades(One is Installed)
1* Protective Cover
1* Miter Guide
1* English Manual
All Accessories for Installation

Notes
1.Please read the operating manual completely before use. And pay particular attention to the safety instructions included.
2.Please make sure the screw has been tightened before using!
3.Please always wear ANSI-approved safety goggles(not included) when using the item. Please wear a full-face shield and a dust mask or respirator(not included).
4.Please keep fingers and hands away from the blade at all times and please do not remove the warning label.
5.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.
【Cutting Assistant】With three 4″ diameter (alloy, resin, emery) saw blades, this product can cut up to 5/8″ deep and can be used to cut wood, stone, metal, etc. to meet your different cutting needs.
【Thoughtful Design】The miter guide can adjust the transverse cutting angle, and one-touch start makes it easy and convenient for you to use. In addition, the toothed work plane prevents the object you’re cutting from slipping.
【High Working Efficiency】The item is equipped with a 90W DC motor and the rotating speed can reach 4500rpm, providing strong power for your cutting work and ensuring that you can complete the cutting task in a short time.
【Wide Application】It can be used in industry, furniture industry, wood processing plants, etc. It can cut non-metallic materials such as plastic, wood, glass, stone, plywood, OSB sheet, acrylic, PVC pipe, gypsum board and non-ferrous materials such as copper and aluminum.
【High Safety】Equipped with curved vents as well as overload protection, it reduces the temperature of the product during operation, minimizes safety hazards, and extends the service life of the product through air circulation.