Drill Press Return Spring, 45 x 10 x 0.8mm Quill Spring Feed Return Coil Spring Assembly Spring Steel Chemical Blackening Finish for Drill Press

Product Description

Quill Feed Return Coil Spring Assembly

When installing, install the spring with a fixed wire directly into the spring, and the wire will slide out.This is the chrome-plated spring that returns the sleeve to the top after drilling. Used for all kinds of vacuum cleaner coil springs, volume tube coil springs, and safety coil springs.

Size – Material Width: 10mm / 0.39-inch, Material Thickness: 0.8mm / 0.03-inch, Spring OD: 45mm / 1.77-inch, Inner Mounting Type: Hook, Outer Mounting Type: Hook, 1 x Drill Press Spring
Material – Made of spring steel, strong and durable, high elasticity, and not easy to break. Chemical blackening, the product performance forms an oxide film and prevents rust.
Feature – Inner mounting type is the hook, outer mounting type is the hook. When installing, install the spring with a fixed wire directly into the spring, and the wire will slide out.
Application – This is the chrome-plated spring that returns the sleeve to the top after drilling. Used for all kinds of vacuum cleaner coil springs, volume tube coil springs, and safety coil springs.
Note – Pay attention to safety when installing springs. Do not loosen the wire of the fixed springs before installing.