Pégas Reverse Skip Sawblades 5″ Pack of 12#7r

Best with soft wood and plywood. Manufactured at Grobet’s factory, Scies Miniatures, in Vallorbe, Switzerland. These blades have the same basic tooth geometry as skip blades except that a limited number of reverse teeth have been added to the bottom of the blade. Reverse teeth prevent splinters from developing on the underside of the work piece because the top teeth do not cut entirely through the work. All operating parameters are the same as other blades. .013″ thick, .035″ width, plain end, 13/7r teeth per inch. .
Best with soft wood and plywood. Manufactured at Grobet’s factory, Scies Miniatures, in Vallorbe, Switzerland. These blades have the same basic tooth geometry as skip blades except that a limited number of reverse teeth have been added to the bottom of the blade.
Reverse teeth prevent splinters from developing on the underside of the work piece because the top teeth do not cut entirely through the work. All operating parameters are the same as other blades. .013″ thick, .035″ width, plain end, 13/7r teeth per inch
The Charts shown are a BASE for people who wants to begin scrolling and don’t know which blade to select for their project, based on the wood type to cut [1], the thickness of it [2], the pattern [3], the expected finish [4] or the hole size to drill for inside cuts [5].
With the experience, the scroller will have their own preferences, which maybe different from our recommendations.