MILWAUKEE’S Circular Saw, 8 In. Blade, 3700 rpm, 5/8″ (6370-20)

Metal Cutting Circular Saw, Blade Dia. 8 In., Blade Side Right, No Load RPM 3700, Arbor Size 5/8 In., Depth of Cut at 90 Deg. 2-9/16 In., Amps 13.0, Tool Length 16-1/2 In., Tool Weight 13.7 lb., Bevel Capacity 0 Degrees, Cord Length 15 ft., Brake Type None, Handle Type Tilt, Voltage 120VAC, Features Dry Cut Technology, Durable Blade Shield with Integral Chip Tank Deflects/Collects Hot Chips and Sparks, Plunge Lever, Includes Circular Saw Blade, Hex Blade Wrench, Premium Cermet Tipped Blades Milwaukee’s 8 in. metal cutting circular saw (models 6370-20 and 6370-21) delivers faster, cooler, cleaner, more affordable metal cutting. Forget the showers of hot metal chips and sparks that were once an aerial threat on metal construction jobsites. The 6370 shears the metal, producing a virtually spark-free wake and cool, burr and scorch-free edges that don’t require post-cut finishing. Cool cut waste, in the form of metal shavings, is effectively contained with a durable magnesium blade shield and channeled into the saw’s integral ChipTank. Cool cutting also means that materials can be handled almost immediately following a cut, reducing downtime. Driven by a powerful 13 amp (1-3/4 max HP), 3,700 RPM motor and equipped with a full grill of razor-sharp, cermet-tip teeth, the 6370 tears through tough cuts without hesitation. Count on up to 10 gauge sheets and 1/4 in. steel plate cuts, all day, every day. More extreme cuts, even up to 3/4 in. steel plate, are possible when proper operating techniques are used. Any way you slice it, cold cutting metal means value. Internal test results indicate that our new metal cutting blades last a minimum of 25 times a standard abrasive wheel. Specially-formulated cermet tip metallurgy and tooth geometry ensure these incredible blades cut faster, stay sharp longer, and resist more impacts for a significantly lower cost per cut (0.20 versus 0.60). To keep on target, the new 6370 features a set of on-board sight-line and blade point-of-entry indicators along with a slot in the saw’s shoe for a rip fence. It is also the first and only corded metal cutting saw to feature a lower guard retraction lever. Plunge cuts, a frequent challenge for metal roofing contractors, are fast and furious with this exciting new tool. The lever’s location, adjacent to the side handle, ensures that the user has both hands firmly on the saw throughout the cut.
Power Tools and Accessories
Country of manufacture: China
Manufacturer: Milwaukee
Dry-cut technology provides faster, cleaner, more affordable metal cutting
Durable blade shield with integral chiptank deflects/collects hot chips and sparks
Plunge lever for fast, effective plunge cuts
Exclusive quick-release shield latch for fast waste disposal and blade changes
Full Two Year Warranty