Tile Laying Machine,Hand-Held Tile Machine Electric Tile Vibrator,6 Speeds Adjustable 60-80 kg Load Capacity Tile Tile Machine

Tile Laying Machine,Hand-Held Tile Machine Electric Tile Vibrator,6 Speeds Adjustable 60-80 kg Load Capacity Tile Tile Machine
Description
This tile-laying machine is made of high-quality ABS, aluminum alloy, and rubber. 6-speed adjustment allows you to change the vibration frequency according to the size of the tiles and 132.3-176.4 lbs adsorption capacity assists you in adjusting the position of the tiles.


How to Use
1. Place the machine on the tiles at the intended laying position.
2. Lift the control handle of the suction cup so that the suction cup will firmly hold the tile, then lock the handle with the hook on the body of the machine.
3. Carefully touch the switch on the left side of the machine with your hand and the machine starts to work, vibrating the projections of the tiles and adjusting the steps.

Battery Replacement
1. To prevent the battery from falling off during vibration, screw the machine and the battery together. When installing the battery, loosen the screws first.
2. Press and hold the buttons on both sides and pull out the battery firmly. It may be difficult to pull out the first few times, which also prevents the battery from falling out. If you can’t pull it out, you can use a screwdriver(not included) to pry it out.
3. Push the battery in and tighten the screws.

Application
It is suitable for engineering teams and home use to move and install wall/floor tiles smaller than 3.93*3.93in. It is ideal for laying various tiles such as wall tiles, floor tiles, bathroom tiles, and TV wall tiles in living rooms, kitchens, bathrooms, and more.

Specification
Color: Black
Material: ABS, Aluminum Alloy, Rubber
Power Source: Battery Powered
Plug Standard: US Standard
Motor Type: Pure Copper Motor
Surface Recommendation: Tile
Battery Type: 2* 12V 1500mAh Lithium Battery(Included)
Endurance (Low Gear): 2-4h
Charging: About 3h
Number of Gears: 6
Rotational Speed: 10000r/min
Adsorption Power: 60-80kg/132.3-176.4 lbs
Applicable Tiles: ＜100*100mm/3.93*3.93in
Noise: About 50dB(Highest Gear)
Power Cord: 98cm/ 38.6in
Handle Size(L*W) : 33*4.5cm/13*1.7in
Suction Cup Diameter: 13cm/5in
Plastic Storage Box Size: 39*18*15cm/15.3*7.1*5.9in
Package Size: 39*18*16cm/15.3*7.1*6 in
Net Weight: 3kg/6.6 lbs
Gross Weight: 3.5kg/7.7 lbs

Package Included
1 x Tile Laying Machine
2 x Batteries
1 x Charger
1 x English Manual
1 x Plastic Storage Box

Build to Last: High-quality ABS and rubber are strong,together with the aluminum alloy shell that is highly effective at dispersing heat,making the machine maintain excellent function for a long time.
Excellent Function: Adopting a pure copper motor and a thickened rubber suction cup of 5″ in diameter,this machine has high-frequency vibration(10000rpm),high efficiency,and a strong adsorption force of about 132.3-176.4 lbs,making it suitable for moving and installing floor tiles and wall tiles while reducing the risk of falling,damage,or cracking.
Adjustable Speed: You can adjust the speed within 6 gears according to the size of the tile(3.93*3.93in) and the thickness of the plaster through the scroll button,enabling you to accurately level tiles and saving you time and effort.
Thoughtful Design: The ergonomic anti-slip handle and 6.6 lbs weight allow you to achieve one-handed operation with less effort while reducing fatigue.
Uninterrupted&Conveninent Work: The two rechargeable 1500mAh lithium batteries with jack-type design allow for easy installation&charging and provide 2-4 hours battery life on a 3-hour charge (each at the lowest gear) without worrying about insufficient electricity that interrupts your work.And the cordless design enables you to use this machine anytime and anywhere.