Band Saw Table Inserts or Scroll Saws Suitable for 12 “/14” Craftsman Band Saws -3 Pack

Product description 5 Pack Band Saw Table Saw Table Insert P/N 1-JL20031002 for Sears Crafsman 124.32607, 119.224000, 119.224010, 351.214000, 351.224010 Model：351.224000 12inch Craftsman Bandsaw w/Cabinet Stand Model：351.224010 14inch Craftsman Bandsaw w/Cabinet Stand Model：124.32607 14inch Craftsman Bandsaw w/Open Stand If you have any questions, please contact us in time. Also Suitable for RIKON12 “and 14” Band Saws
◆ 3 Pack Band Saw Table Saw Table Insert P/N 1-JL20031002 for Sears Crafsman 124.32607, 119.224000, 119.224010, 351.214000, 351.224010
◆ Please measure your saw as some bandsaws has slightly smaller holes for the throat plate. If so some slight filing or sanding may be required.If you mind, please don’t buy it.
◆ Before purchasing, measure the saw table inserts on your bandsaw to make sure your bandsaw can accommodate 2-3/4″ diameter inserts.
◆ IMPORTANT INSTALLATION NOTE: First make sure the lip of the hole is free from dirt. If a table alignment pin,is not tight or missing,often the blade mounting slot will close up some over time which reduces the insert hole diameter slightly. I tap a flat head screw driver into the blade installation slot a bit to wedge it open. That should spread the insert hole enough for it to fit