2 Pack Urethane Bandsaw Tires 12 inch x 3/4 inch x .095 inch Fits Most Jet Delta & Craftsman 12″ Band Saws That Requires a 3/4″ Wide Tires- No Adhesive Needed

How to install a band saw tires

1.Disassemble the wheel from the saw.

2.Remove the old tires and clean any debris and adhesive from the wheel.

3.Try to place a part of tire on the wheel and fix it by spring clamp, and then use another spring clamp to fix the tires on the other side, as symmetrically as you can.

4.Stretching the tire onto the wheel completely. You may need to use a pry tool to help the tire onto the wheel. Be sure to avoid sharp edges. Take down the spring clamps.

5.Even out the stretch. Do this by inserting a round object such as a dowel rod between the tire and the wheel and rotating it around the wheel a couple times.

6.Re-assemble your saw and set it up according to your saw’s owner’s manual.
Ysihuang Urethane Bandsaw Tires 12″ x 3/4″ x .095″ – 2 pack, it can be installed on any 12″ band saw that requires a 3/4″ wide and 3/32″ thick tire.
12 inch x 3/4 inch x .095 inch bandsaw tires can be compatible with most Jet & Delta 12″, Craftsman: 3bs11601 137.22412 137.27958 Rikon: 10-315. Also fits for any band saw that needs a 12″ x 3/4″ x .095″ tire. The actual wheel diameter can be from 11-6/8″ to 12-1/2″ in diameter.
Made of urethane, it have hard-wearing and flexible feature and therefore not easy to crack, peel or harden.
Easy and fast be installed. The tires can be stretched easily, hence it can be installed at the wheel or removed it from the wheel quickly.
Ysihuang Urethane band saw tires have precise dimension so it can be run with the wheel closely.