2 Packs Urethane Bandsaw Tires Fits for 8 Inch Delta 28-185 Band saw – No Adhesive Needed

How to install a band saw tires

1.Disassemble the wheel from the saw.

2.Remove the old tires and clean any debris and adhesive from the wheel.

3.Try to place a part of tire on the wheel and fix it by spring clamp, and then use another spring clamp to fix the tires on the other side, as symmetrically as you can.

4.Stretching the tire onto the wheel completely. You may need to use a pry tool to help the tire onto the wheel. Be sure to avoid sharp edges. Take down the spring clamps.

5.Even out the stretch. Do this by inserting a round object such as a dowel rod between the tire and the wheel and rotating it around the wheel a couple times.

6.Re-assemble your saw and set it up according to your saw’s owner’s manual.
Ysihuang Urethane Bandsaw Tires 9/16″ Wide x 3/32″ Thick – 2 packs, it can be installed on 8″ Delta 28-185 Band Saw.
Made of urethane, it have hard-wearing and flexible feature and therefore not easy to crack, peel or harden.
Easy and fast be installed. The tires can be stretched easily, hence it can be installed at the wheel or removed it from the wheel quickly.
Adhesives – Adhesive is not required for these tires.
If you choose to heat them for installation soak them in water no hotter than your tap or 140℉.