Adams Rite PS-SE Baked Enamel Finish Power Supply, 115 VAC, 0.7A, 10″ Width x 10-3/8″ Height x 4-1/8″ Depth, Black, for SVR, CVR and Mortise Devices (Pack of 1)

Adams Rite power supply with optional battery backup for all 3000 and 8000 exit devices with motorized latch retraction(SE) option. Input power: 115 VAC, 0.7A. The PS-SE has two open hold timers. Hold open time settings are adjustable from 2-60 seconds. This has two user serviceable fuses: F1: transformer output: 2 AMPS/250V 5x20MM and F2: transformer input: 2 AMPS/250V 5x20MM. Designed to power up to two 3000SE or 8000SE exit devices in the operating modes. Sequential mode – a single input switch (Dry Contact) operates two devices in sequential operation. Ideal for a double-door setup. Independent mode – each SE exit device is controlled by its own input switch. Hinged, steel cabinet measures 10-inches width by 10-3/8-inches height by 4-1/8-inches depth. Black, baked enamel finish, with knockouts for conduit connections. Sized to accommodate 2 sealed lead acid batteries (7AH, not included). This power supply is required for the motorized latch retraction (SE) option on Adams Rite exit devices. It operates at 24 VDC to power up to two SE exit devices in sequential or independent modes. The PS-SE is also equipped with a fire alarm disconnect interface circuitry.
Input power: 115 VAC, 0.7A
This has two open hold timers
Hold open time settings are adjustable from 2-60 seconds
This is designed to power up to two 3000SE or 8000SE exit devices in the operating modes
Hinged, steel cabinet measures 10-inches width by 10-3/8-inches height by 4-1/8-inches depth