AL-460 Power Feed Z-Axis for Milling Machine 460 in-lb Torque, 0-200RPM Table Milling Machine Power Feed 110V,for Bridgeport and Other Knee Type Mills with a 5/8″ Diameter Shaft on the End

Product Description

Precautions Before Installation:

Before installation,be sure to turn off the power supply of the milling machine. Don’t install the power feed under live condition.
The product is supplied by AC110V 50/60Hz (Please
 prepare the required power supply for the product).If the product is used in a region not in conformity with the national power supply, users please prepare a transformer, avoid using incorrect power supply and result in damage of the product.
The product is provided with overload protection, the power supply will be cut out in case of overload or stuck. It can be reset automatically by restarting the power switch.
Check whether spiral gear oil is enough when carrying out maintenance. Open the carbon brush cover semiannually to check whether the carbon brush is worn. If the length is less than 7mm,it is recommended to replace the two sets of carbon brushes at the same time.

Power Feed Z-axis for Milling Machine

This power feed Z-axis for milling machine is made of tough aluminum, which is strong and durable. Its surface has been specially treated such as polishing to resist corrosion and abrasion, which allows it to maintain a long service life.

Manual and Automatic Control

This multifunctional power feed for milling machine can be set to work automatically at a constant speed, or it can work by adjusting the speed adjustment knob. And the circuit breaker automatically protects the transmission gear and electronic components during the whole process.

High Efficiency and Low Noise

This mill power feed adopts Gleason Spiral Bevel Gear: High transmission efficiency, stable transmission ratio, wear resistance, long life, low noise, large arc overlap coefficient, high bearing capacity, reliable operation, compact structure and energy saving. Considering the loud noise when the milling machine is working, the low noise feature of this power feed is very helpful in reducing the noise in the working environment.

Simple Operation

Rotate Speed: 0-200 RPM; Max Feed Rate: 650mm/min; Max Return Speed: 850mm/min.
The speed adjustment efficiency is fast. When milling, the transmission speed changes little, and the milling surface has high precision and smoothness. The machine will not shake when it is driven at low speed.

Easy Installation

Features: Small size, Simple installation with reference to the X-AXIS instruction, low noise when reversing.
This power feed can work with almost any horizontal knee type mill and other small mills with the same mounting pattern and a 5/8″ diameter shaft on the end.

Wide Application

This power feed is an indispensable collocation for your milling machines. This table milling machine power feed fits almost any vertical knee type mill, rocker milling machines, drilling and boring machine, and small grinders.

GPOAS is a new prominent brand that focuses on in industrial equipment and household tools

1 x Power Feed Z-axis for Milling Machine
1 x Copper Gear & 1 x Flat Key Pin
2 x Limit Block
15 x Round Flat Washer
1 x Nominal Diameter
4 x Install Screw
1 x Limit Switch Box
2 x Limit Switch Spring+1 x Handle Spring
1 x Bearing Inner Ring
1 x Connecting Rod & 1 x Flange

GPOAS Z-Axis Power Feed Kit For Milling Machine

0-200 RPM Rotate Speed & 450 in-lb Torque & 90W,110 V, 50Hz/60 Hz

GPOAS Z-axis power feed kit is equipped with sturdy materials and precision components. It works efficiently and quietly on equipment such as 5/8″ shaft end milling machines. In addition, it is designed with manual knobs, automatic buttons and feed reserving handles for easy operation. It is the perfect companion for your milling machine.

Model: AL-460 Z-AXIS
Control: Manual and Automatic
Power: 90Watt, 110V ,50 / 60Hz,Single Phase
Rotate Speed: 0-200 RPM
Max Torque: 450 in-lb
Max Feed Rate: 650mm/min
Max Return Speed: 850mm/min
Net Weight: 3.75kg/8.27 lbs;Product Dimension：7 x 3.5 x 11.7 INCH

【BASIC PARAMETERS】GPOAS Z-Axis power feed is made of aluminuml;Power Parameter:90Watt,110V input voltage,50/60Hz,single phase;Rotate Speed:0-200 RPM.Max Torque:450in-lb;Max feed rate: 650mm/min; Max return speed: 850mm/min.This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc.
【PORTABLE AND EASY TO INSTALL】This power feed for milling machine is compact and portable.Weight: 3.75kg/8.27lb, Size: 7*3.5*11.7inch. And whether it is for a novice or a skilled operator, it is very easy to install this power feed according to the instruction and online video or by yourself.After-sales:You will get worry-free 18-month warranty and lifelong technical guidance.
【STABLE AND EFFICIENT】This power feed adopts Gleason Spiral Bevel Gear with advantages of stable transmission ratio,low transmission noise,high transmission efficiency and high bearing capacity.And when fast transmission, if the tool collides with the workpiece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage.
【AUTOMATIC AND MANUAL CONTROL】You can set this power feed to work at automatic constant speed to free your hands or work by manually adjusting the speed control knob to do more precise milling work.And this multifunctional milling machine power feed can work with excellent speed control in the entire range according to your needs.
【WIDE APPLICATION】This milling table power feed fits some vertical knee type mills with the same mounting pattern and a 5/8″ diameter shaft on the end,But it will NOT fit mills with a different mounting pattern or different sized leadscrews like powermatic and some other odd sized machines, so please make sure yours is the typical Bridgeport type as mentioned above.NOTE:Any shipping damage,using problems or missing accessories, please feel free to cantact us, we will solve them for you.