AUCO Durable Right Angle Drill Attachment, Impact Fit, Max Torque 500 in-lbs, All Metal Body & Steel Gear, For Use with Cordless Drill and Impact Driver, Compact Design for Work in Tight Area

Product Description

Key Features

Applicability

2-inch front-to-back design
Compact design for driving screws and drilling holes in tight, difficult work areas

Durability

All metal housing for maximum durability
The support arm provides security and a comfortable grip. It can help you save time and get the job done easier.

Nice Torque

Up to max. 3000 RPM and 500 in-lbs (56.5 Nm) of torque.
For use with cordless drill and impact driver up to 18 volts.

Key Features

Good Flexibility

360° Collar Rotation
150° Support Arm Rotation
The support arm can be adjusted to 40 positions ( 8 positions around the head of right angle drill attachment, each has 5 side angle positions).

High Compatibility

Compatible with a wide variety of 1/4 inch HEX Shank Accessories

Drill Bits
Spade Bits
Nut Drivers
Drill Chucks

Before Use

Note:

When adjusting the position of the support arm, align the edge of right angle drill attachment head with the edge of the adjustment collar. Otherwise, the support arm will be stuck. With drills up to 3,000 RPM, the support arm can be adjusted to 40 positions ( 8 positions around the head of right angle drill attachment, each has 5 side angle positions).

Warning:

To reduce the risk of injury, the support arm must be securely tightened in the detent position. Otherwise, the adjustment collar would rotate when used.
The angle attachment is for use with cordless drills and impact drivers up to 18 volts. Never use the attachment with impacting tool or corded tool.

How to use

Make sure the adjustment collar is on the “free rotation” position.
Rotate the adjustment collar until the support arm is in the desired position (45° increments).
Unscrew the support arm 2 full turns. Position the support arm to the desired angle( 30°increments). Tighten the handle securely.

How to use

Inserting Bits

1. Insert the bit shank into the chuck.

2. Pull on the bit to make sure it is secure.

3. Pull down the chuck collar and release the bit shank.

Operation:

Make necessary adjustments to support arm. Hold the power tool securely to control the torque reaction. Place the bit against the workpiece, maintaining 90°angle between the right angle drill attachment and the workpiece. Start the tool slowly, gradually increasing speed.

WARNING:

To provide maximum control, please adjust the support arm before using it. Never use the right angle drill attachment with the support arm loose.

Hold the tool securely and tightly when drilling/driving to control the torque reaction. Be careful that high torque situation may cause the tool to spin, causing loss of control.

1.Wide applicability – Compact design for driving screws and drilling holes in tight, difficult work areas.
2.Stability – The support arm provides security and a comfortable grip. It can help you save time and get the job done easier.
3. Durability – All metal housing for ultimate durability and constructed with steel gears and ball bearing drive for smooth drilling and long life.
4. High compatibility – Compatible with a wide variety of 1/4 inch HEX Shank Accessories. Made for impact fit applications, and works with cordless drill and impact driver up to 18 volts or Up to max.3000 RPM and can exert maximum torque of 500 in-lbs (56.5 Nm).
5. Good flexibility – Support with 360° collar rotation and 150° support arm rotation