Carbide Hole Saw Bit 3 1/2 Inch Concrete Hole Saw 89mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Drywall And Cement Block For Pipes and Conduit

Product Description

Tungsten Carbide Grit Edge Hole Saw and Accessories

Carbide Hole Saws for Concrete and Drywall

Carbide Hole Saw Tungsten Carbide Grit Edge. Serrated Edged Teeth Hole Saw Capable of Drilling Concrete Drywall Brick and most Masonry Products. No Teeth to Dull and Bind. Must be used with Hammer Drill and TCT Tipped Pilot Drill.

Hole Saw Arbors with TCT Pilot Drills Are Suitable for These Size Carbide Hole Saw

Hole Saw Arbors / Mandrels Suitable for use with Larger Carbide Grit Hole Saws have Tungsten Carbide Tipped / Masonry Pilot Drills which can be swapped out for High Speed Steel Pilots if you use them on non Masonry Products Later. 7/16 Hex End Asin: B08NT2P715 OR SDS Plus End ASIN: B08NHMWY9S

7/16″ Hex Female to 7/16″ Hex Male 12″ Hole Saw Arbor Extension

7/16″ Hexagonol Ended Hole Saw Arbor / Mandrel Extension is Suitable with any 7/16″ Hex End Arbor – Extends Drilling Capabilities an extra 12″ Deep. Fits any regular 1/2″ wide opening Drill Chuck. ASIN B08NHB1T2R

7/16″ Hex Female to SDS Plus Male 12″ Hole Saw Arbor Extension

The SDS Plus Male end of this Arbor / Mandrel Extension Means this Arbor must be used with an SDS Plus Type Drill. The Female end that Connexts to the Hole Saw Arbor is a 7/16″ Hex End so the Hole Saw Arbor must Also have a 7/16″ Hex End – Extends Drilling Capabilities an extra 12″ Deep. Fits SDS Drill Chuck Only. ASIN B09S8MHFN2

Tungsten Carbide Hole Saws Material Cutting

Holes in Cement Block

Must use Hammer Drill and Must use TCT Pilot Drill for all Masonry Products.

Holes in Concrete Pavers Block and Coping

For Deep Holes Break Core out when Hole saw bottoms at 1 1/4″ Deep, this allows Hole Saw to continue. Regularly check for TCT Pilot Drill not worked loose, a loose pilot will prevent the hole saw from cutting.

Cut Hardie Board Drywall Marble Slate Cement Board Drywall

Pilot Drill can be replaced and or swapped out for a HSS Pilot Drill if Drilling non Masonry Products like Plywood. TCT Pilot Drills are only for Masonry Products.

Serrated Teeth Covered with Tungsten Carbide Grit

Can be used with SDS Plus or Hex Arbors.

89mm 3 1/2″ CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull.
TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes. Also Available with SDS Plus Arbor or Hexagonal Arbor.
TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw arbors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not.
MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7″ 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot
WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists.