Chop Saw, 26-29mm Metal Chop Saw, 110V Multi Purpose Miter Saw, 9000R/Min Chop Saws for Woodworking, 0-45°Adjustable, Low Noise, for Cut Soft Metal, Wood, Plastic, Acrylic, Bamboo Material Etc

Product Description

Multi Purpose Chop Saw

Wide Application range: can cut soft metal, wood, plastic, acrylic, bamboo material, handmade, etc…

Chop Saw Parameters

Cutting thickness: 26-29mm Motor: Double shaft 795 motor Voltage: 110v 60HZ Motor voltage: DC12V-24V Size:150*180*110mm Machine applicable voltage: 110V-240V Power: 96W Rotation speed: 4000-9000rpm Adjustable angle: 0-45° No-load decibel: about 80

When using this product for the first time, please ensure that the machine is connected to the power cord and operating properly.

All accessories to be used must be installed in the case of power failure.

Packing List 1 x Cutting machine 1 x Multifunctional saw blade 1 x Grinding wheel cutting saw blade 1 x Adapter (including plug)

Install the Saw Blade

1. Find the place where the saw blade is installed.

2. Grasp the belt by hand, then use a wrench to turn the screws on the saw blade mount.

3. Remove the spacer (if the inner hole of the saw blade is 20, you may not remove it).

4. Align the saw blade with the mounting point.

5. Put the saw blade in place.

6. Use the wrench to retract the locking screw, the saw blade installation is completed.

Precautions for Safe Use

Warning: Please do not touch the running grinding wheel with your hand to avoid injury.

1. It is strictly forbidden to immerse the machine in water.

2. Private modification is strictly forbidden to cause unnecessary damage.

3. Working time: Please operate strictly following the rated working time, each use shall not

More than two hours, more than one and a half hours of continuous work, must stop fifteen minutes

clock, wait for the motor to cool down before working.

4. This product can not be directly connected to household electricity, you must use the power converter to convert the motor, Can use 12-24v electricity before use.

5. When using this machine, do not touch the running saw blade with your hands to avoid injury.

6. If this product is not used for a long time, please put it in a dry place to avoid rusting.

【Chop Saw Parameters】Voltage: 110v 60HZ, Working voltage: DC12-24v, Cutting thickness: 26-29mm, Motor speed: 9000r/min, Metal Chop Saw use strong power for a long time and easily cut all kinds of soft materials.
【Adjusting Ruler&Regulator】0–45 degrees, angle adjustment. Can meet your multi-angle cutting and polishing, height adjustment button can effectively control the distance between the blade and the table.
【Included Saw Blade】Miter SawGrinding wheel cutting can cut the material is small steel pipe, small steel plate, small square steel, stainless steel, small aluminum plate and so on.
【Multifunctional Saw Blade】Metal Chop Saw Can cut the material is wood, acrylic board, ABS board, electric board materials, etc., suitable for cutting thick materials.
【Low Noise&Application Range】Chop Saw Working and running, the noise is around 80 minutes.can cut soft metal, wood, plastic, acrylic, bamboo material, handmade, etc.
May you have a sunny smile every day and enjoy every moment of joy in your life. May your world be filled with love and warmth, and keep your expectations and hopes for the future!