CNCTOPBAOS 1610 PRO CNC Milling Machine,with GRBL Offline Controller,3 Axis Desktop DIY Mini CNC Router Kit Engrave Carving PVC,PCB,Acrylic,Wood Cutting Engraving Machine CNC1610 Pro

Product Description

CNC 1610 Pro CNC Router w/ offline controller

Package include:

1 set 3 Axis 1610 Pro CNC Router Kit Engraver Machine
1x GRBL 1.1f Control Board
1x 775 spindle with ER11 collet
1x Offline remote controller
1x 24V DC Power Supply Aadapter
10x 20°0.1mm Drill Bits
1Set Allen Wrench
1x 4G USB flash drive include english user manual & GRBL software

Specification:

Working area: 18x10x4.5cm (approx.7.08×3.93×1.77 inches)
Frame size :30x26x25cm(approximately 11.81×10.23×9.84 inches)
Spindle: Diameter 45mm 10000 rpm maximum power 120W
Material: Aluminum Alloy
Screw rod: T8 screw rod, lead 4mm, double copper nut backlash
Spindle Chuck: ER11 Collet
Step motor: Nema17 stepper motor 1.33A,0.3N.m,43oz-in,42x42x34mm
Power supply : 24V 5.6A power adapter (input voltage 110-240V)
Support System:Windows XP / Win 7 / Win 8 / Win 10 (32/64 can be)
Connection: PC-USB connection
Software: GRBL controller
Supporting file:G-code (.nc/.txt/.tape/.gcode)
Processing accuracy:About 0.2mm
Spindle PWM speed: Support;power 0-100% adjustable

775 Spindle

Spindle parameters: 775 spindle motor (12-36V) 24V:10000r/min
Mounting hole diameter: M4 screw hole; Mounting hole pitch: about 29mm.
Motor shaft diameter: 15mm; Motor diameter
Drill clamp parameters: ER11-3.175mm ( can be replaced 0-7mm )
Control software: grbl control(candle)
Supporting files: G-code (.nc/.txt/.tape/.gcode…)
Processing accuracy: About 0.2mm
Machinable material: Wood、 plastic、 PCB、 PVC、 carbon fiber、 acrylic、 density board etc
Power: DC 24V 5.6A power adapter (input voltage 110-240VAC)

GRBL controller board

Connection: USB (USB-CH340)
Software: GRBL controller, UniversalGcodeSender
Input voltage: 12-24VDC
Master chip: atmel 328P (arduino nano)
Spindle drive chip: MOSFET (recommendation 24V, current : within 10A
Spindle PWM speed: Support
Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor Nema17/Nema23)
Power Interface: 5.5-2.5mm DC interface
Support 3-pins module: support 0.5W-20W module
Supporting file:G-code (.nc/.txt/.tape/.gcode)

GRBL offline control

Support SD card and TF card at the same time, standard capacity 1G.
With this offline controller module, you can directly control the CNC router without connecting it to your computer.
After inserting the file into the SD card,the engraving file can be directly identified. You can also use the micro USB cable to connect the offline hand controller board to your computer and save the file directly.
Manually control: manually adjust X,Y,Z axis location as engraving starting point,manually open or close spindle,manully open or close cooling fan
File engraving: after off-line controller save file, it can connect the GRBL control board and process engraving,no need to connect PC computer
Save file: after the off-line controller connect PC,it will be recognized as USB,large capacity storage device, can access engraving file directly.
SD shows it is SD card condition,turn on power supply after insert SD card,otherwise,it won’t work.SD card capacity 4G could be recognized.

Advantages

Support oftware: GRBL controller,Candle, UniversalGcodeSender
Add emergency stop button port,tool probe port and XYZ limit port.
Power supply:12-24V DC
The spindle supports 0-100% adjustable PWM power.
Support limit switch, tool setting, steering gear, cooling fan and other functions.
Support PWM / TTL signal control, power 0-100% adjustable!
Increase the power button switch
Cancel the drive module,integrate the imported stepper motor drive,no need to worry about module damage. And integrated heat dissipation aluminum alloy.
Add offline recognition function, you can insert offline module and computer at the same time. The machine will automatically recognize whether it is controlled by the computer.
Enhanced spindle drive.can support 20,000 rpm spindle.
Add the fan port to force heat dissipation

Add Offline controller

GRBL Offline Controller

Main Page

Ctrl: Machine Control; File: Use the Gcode file; Press [Y+] [Y-] to select; Press[Ok] to Enter

Control Page

X± Y± Z±: Moving Axis
OK/Spindle: Spindle ON/OFF
Exit/Step: Change Step/Exit (long press)
How to increase the spindle power: After pressing the spindle button, press and hold the OK button and the Z+ button simultaneously to increase the speed.
How to decrease the spindle: After pressing the spindle button, press and hold the OK button and the Z- button simultaneously to decrease the speed.

File Page

Common supported formats include nc. tex. tap.
Press [Y+] [Y-] to select file
Press [Ok] to Enter
Press [Ok] to begin if you are ready
Note:Long press [Exit] to stop machining

Add emergency stop button port, probe port and XYZ limit port.
Add the outer casing: protect control board in transit,to avoid short circuit problem during use;
Add the power button switch;
Cancel the drive module,use integrated imported stepper motor drive,with short circuit protection,and integrated heat dissipation aluminum alloy;
Add the fan port to force heat dissipation;
Add offline recognition,can insert offline modules and computers at the same time.Offline will automatically identify if there is computer control.
Enhanced spindle drive,can support 20000rpm spindle.support more powerful spindle.
Improved USB interface: the original USB interface is patch soldering, transport collision and improper use, easy to drop, now changed to plug-in, very strong;
The spindle drive increases the optocoupler isolation, which makes the control board generate less heat, and the spindle speed adjustment is more linear and safer.

Add the function of X/Y/Z axis limit switches,optimized the XYZ limit port and the port connected to the device,making wiring and operation easier.After installing the limit switch, when the XYZ axis moves beyond the travel of the engraving machine, the limit switch will trigger the machine to automatically stop the movement.
Add the function of emergency stop button,this function can be used when an emergency stop is required at work, making our work safer and more efficient.
Add the power button switch and move the power switch button from the bottom to the side,simple operation,more safety in the process of using the machine.

The control board support two engraving methods,our package comes with a spindle motor but without the module in the picture above.

Q&A

Q: What materials can the milling cutter generally engrave or cut?

A: Wood, acrylic (acrylic), pcb, pvb, soft metal, iron, glass, stone etc.

Q: What thickness of wood or acrylic can generally be cut by module?

A: 3-5mm wood board (acrylic), speed setting 100, power setting 1000;

Multiple cuts can cut 12mm wooden boards by spindle.

CNC 1610 Pro Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers;
1610 Pro cnc machine is very easy to install,stable structure.
Main application:can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material;
soft metal like copper and aluminum and other materials, but can not carve hard metal, jade or other very hard texture of the items.
if you change the spindle to a 3pins module,also can carve the kraft paper, wood, leather(wallet), bamboo.

Q: The X,Y and Z axis of the machine cannot be moved,what should I do?
A: First check whether the wires are correctly connected, whether the power switch of the control board is pressed, and then check whether the coupling is off.
Q:What should I do if the control board cannot be connected?
A:Exit the software, unplug the wire, and reconnect it. Or update the firmware.
Q: How to modify the parameters when the limit switch is activated?
A: Enter 21=1 and 22=1 commands.
Q: The engraved image is reversed,what should I do? A: Enter 3=2 or RST=*command

Our parcel include a 4G USB flash drive,you can download the english user manual and GRBL software from the flash drive.
File formats supported by the software: *.nc, *.ncc, *.ngc, *.tap,*.txt and *.cnc.
Software used to create Gcode: Carbide Create, Artcam, MeshCam, Fusion360, Inkscape etc.

【Upgrade Version 1610 Pro with Offline controller】Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers;The CNC1610 PRO machine is very easy to install,stable structure,our parcel also include english user manual.
【Working area】18x10x4.5cm;Frame size: 30x26x25cm;Type:USB port Desktop cnc router【System requirements】 Windows XP, win7,win8,win10; Supporting files:G-code (.nc/.txt/.tape/.gcode)
【Spindle&Stepper Motor】Diameter 45mm 10000 rpm maximum power 120W; ER11-3.175mm ( can be replaced 0-7mm ); Nema17 42 stepper motor 1.3A/0.3N.m
【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other materials, but can not carve hard metal, jade or other very hard texture of the items.
【GRBL Software】GRBL control (candle); Parcel include 1pcs 4G USB flash drive which contains user manual & GRBL software