Gryphon Aquasaw XL Bandsaw

Gryphon AquaSaw C-40 CR – The Premier Fragging Saw This Corrosion Resistant AquaSaw is designed for use with salt water and is generally used to cut corals. It is based upon the regular C-40, but has improvements designed to reduce maintenance when the saw is used in a corrosive environment, such as with salt water. A 3.5″ vertical clearance, with the upper blade guide removes,allows cutting of most small and medium sized corals. Features Simple construction with few moving parts Motor has sealed bearing for improved resistance to corrosion New High Speed Motor for fastest cutting available Direct drive – no belts or pulleys Powerful motor located on top, away from the water A shield is provided around the bottom of the motor to deflect salt water splash Huge water reservoir under the work surface One square foot of unobstructed work surface Under table blade guide and new blade guide above table. Metal parts are stainless steel or hard anodized aluminum Ships with stainless steel blade, however the saw can use any Gryphon blade Specifications ModelAquaSawAquaSaw XL Vertical Clearance3.5″ without upper guide5.5″ without upper guide Motor1/3 hp Direct Drive DC1/3 hp Direct Drive DC Blade Speed40 miles per hour40 miles per hour Platform AreaOne square footOne square foot Coolant SystemRecirculating tap or salt water – no water requiredRecirculating tap or salt water – no water required Motor1/3 hp Direct Drive DC1/3 hp Direct Drive DC Coolant Reservoir10″ x 9″10″ x 9″ Tension AdjustmentSingle KnobSingle Knob Blade Dimensions37″ Circumference, 0.02″ wide, 0.14″ deep42″ Circumference, 0.02″ wide, 0.14″ deep Manufacturer WarrantyOne YearOne Year