HayWHNKN Drill Portable Magnetic Drill 1.97″ Core Drill Diameter 110v 1400W Power Magnetic Drill Machine Electric magnet Drill Machine for Metal Surface

Suitable for steel structures, shipbuilding, equipment manufacturing, equipment installation, bridge engineering, wind power generation, oil drilling platforms, power construction, manufacturing and other fields.
Operation Precautions
1. Insert the power plug, align the drill bit with the machining position, and then turn on the electromagnetic switch. Use a magnet to adsorb onto
the surface of magnetic materials such as steel, ensuring that there are no debris on the surface, and check if the magnetic force is normal. The
required thickness of the steel plate should be at least 6 millimeters or more on the flat surface.
2. Place the magnetic drill near the required drilling area, select suitable adsorption materials, and thread one end of the safety belt into the lifting
hole of the rack. Tie the other end to a sturdy support and thread it in with a 100mm outlet. Then tighten the bolts of the fasteners and try to pull
them with force without loosening or shifting.
3.Open the drill switch, check whether the drill is beating, the sound is smooth, if everything is normal, you can turn the handle to feed.
4. The beginning of the feed should be slow, not hard, the feed amount is generally about 0.05mm, do not exert too much force to prevent
overload.
5. If the drill suddenly stops for some reason, the power switch must be turned off immediately (please turn off the magnetic base control switch).
6. Continuous use of 2-3 hours after the need to rest for a period of time to prevent the magnetic seat due to overheating and burn out.
【Paramter】Voltage:110V;Power Input:1400W;Max.attraction:17000N;Rate frequency:60Hz;No-load speed:100-510rpm;Twist drill dia:23mm;Core drill dia:50mm;Max tapping dia:M14.
【Magnetic Base】Our magnetic drilling rig uses high-quality motors with a power of up to 1400W. Super suction magnetic seat, suction more than 17000N,side suction can be suction.High strength wear-resistant treatment, more durable.
【Adjustable Speed】This magnetic drill press is with infinite speed control knob, no-load speed 100-510rpm adjustable.Machine start switch, reverse and reverse switch, magnetic switch, simple operation.
【Precise Control】The electromagnet drilling machine is equipped with a rocker type lifting handle, can accurately control the height of the head lifting.And you can observe whether the machine is in a horizontal position by the equipped leveling device.
【Scope of Application】After being energized,the electromagnet of the magnetic drill base generates a magnetic field that can firmly adhere to the surface of the workpiece, achieving drilling or threading of steel plates.