KAKA INDUSTRIAL BS-85 Metal BandSaw 3.3×4.1 inches Benchtop Metal Cutting Band Saw110V-60HZ-1PH

Product Description

Packaging Of The Kaka BS-85 Portable Band Saw

The box is rather large, roughly L 28 X W 14 x H 18 (720 x 37 x 45mm) and it weighs 47 lbs or 21kg. The BS-85 was protected very well with polystyrene packing surrounding it completely.

The motor has a soft start instead of a basic on/off type switch. Having a soft start eliminates the jolt you get with an on/off switch. The saw ran very smoothly with no vibrations thanks to the quality of the motors bearings. The large air vents allow for efficient cooling for extended periods of use, for many years to come.

The speed controller allows for stepless speed regulation, giving you the ability to set the saw for the different materials and thicknesses. Set at low speed, the band saw operates at 30 meters per minute (mpm) and 88 mpm on high.

For Stainless Steel – 30 mpm

For Mild Steel – 60mpm

For Aluminium – 88mpm

The above speeds are recommended in the owners manual. These speeds will extend the blade life.

The main body of the BS-85 is made from cast aluminum, giving it a lot of strength but still keeping the weight down to keep it portable.

The base is a heavy-duty thick gauge pressed steel to give the saw a lower center of gravity when it is in the vertical position.

The vice is made from cast iron with a fine ground finish on the mating surfaces allowing for smooth clapping of the job, eliminating the jaw binding, due to too much play in the moving parts.

The material stop can extend out to 26 1/2 inches (680mm), giving accurate cuts if you have a number of cuts the same length.

The Ability To Turn The Saw Head When Cutting A Mitre (45 degrees)

The huge benefit of portable band saws is the tool-free adjustment, giving it the ability to turn the cutting head up to 45 degrees. Cutting a 19 1/2′ length (6-meter) of square tube at 90 then 45 is easy. The head of the bandsaw pivots means you don’t have to take the material out of the saw to physically move the saw to the correct angle then put the material back into the saw. Saving time and lots of frustration.

The Kaka Band Saw comes with a stainless steel 8-12 tooth per inch blade, giving you the ability to get to work on that project right away. The blade size on the Kaka band saw is 52.17 x 0.51″ x 0.03″ (1325x 13 x 0.65mm). The blades come in a range of teeth per inch to better suit your requirements.

Item No.：188000-110V

Model： BS-85

Capacity： Circular @90° 85mm(3.3”)

Rectangular @90° 85x105mm (3.3”x4.1”)

Circular @45° 70mm(2.7”)

Rectangular @45° 65x75mm(2.5”x2.9”)

Blade speed @60Hz 40-88MPM

@50Hz 40-88MPM

Blade size 13×0.65x1325mm TPI 14

Motor power 1000W

Drive Gear

Voltage 110V

Power Phase 1PH

Packing size 28x14x18in

N.W./G.W. 41/46lb

Add to Cart

Add to Cart

Customer Reviews

4.4 out of 5 stars
46

4.3 out of 5 stars
44

Price

$1,283.99$1,283.99 $589.99$589.99

Stock No.
188000 188101

Model
BS-85 BS-150

Capacity(Circular @90°)
3.3 inch 5.9 inch

Capacity(Rectangular @90°)
3.3 x 4.1 inch 5.9 x 5.5 inch

Capacity(Circular @45°)
2.7 inch 3.5 inch

Capacity(Rectangular @45°)
2.5 x 2.9 inch 3.5 x 3.9 inch

Blade Speed @60HZ
40-88 MPM 45-60 MPM

Blade Size
0.51 x 0.03 x 52.2 inch 0.78 X 0.03 X 68.3 inch

Motor Power
1 KW 2.0 KW

N.W./G.W.
41/46 lbs 75/85 lbs

1. Light duty, easy to carry to any workplace
2. Angle cutting, 0-45°swivel bow head
3. Variable speed
4. Single phase motor, an ideally tools for home use
5. Electronic trigger handle lets you easily turn the saw on and off.