Special_Collection 3″ Round vice for rotary milling indexing table with the -nuts engineering tool 80 mm

MINI ROTARY TABLE 3″ / 75MM – HORIZONTAL & VERTICAL Specifications: A Precision Small low profile Rotary Table for Milling operation with Table Diameter – 3 Inches (75 mm) Vertical Height – 1-5/8 Inch Gear Ratio – 36:1, which basically means that the 1 rotation of the handle shall rotate the table by 10 degrees. Table scale is calibrated in 5 degree increement. Can be used both in horizontal & vertical position. Base Dimensions: 4. 1/8″ x 3. 1/4″ 4 T-Slots: 5/16″ SUITABLE M6 CLAMP KIT FOR THIS ROTARY TABLE This will fit both the Horizontal & Tilting model of our 3″ (75 mm) & 4″ (100 mm) Rotary – 4 Slots Table This Set includes Following: 2 x step blocks 2 x tee bolts with flanged nut M6 thread 2 x clamps Bolt length: 55 mm overall & Bolt Thread M6
2 x step blocks 2 x tee bolts with flanged nut M6 thread 2 x clamps
Table scale is calibrated in 5 degree increement. Can be used both in horizontal & vertical position. Base Dimensions: 4. 1/8″ x 3. 1/4″ 4 T-Slots: 5/16″
SUITABLE M6 CLAMP KIT FOR THIS ROTARY TABLE This will fit both the Horizontal & Tilting model of our 3″ (75 mm) & 4″ (100 mm) Rotary – 4 Slots Table This Set includes Following: 2 x step blocks 2 x tee bolts with flanged nut M6 thread 2 x clamps Bolt length: 55 mm overall & Bolt Thread M6