Steel Dragon Tools 1-3/4″ Magnetic Drill 1-3/8″ Depth 13pc Tungsten Carbide Tipped Annular Cutter Kit

Steel Dragon Tools 1-3/4″ Magnetic Drill 1-3/8″ Depth 13pc Tungsten Carbide Tipped Annular Cutter Kit

This package includes the Steel Dragon Tools MD45 Magnetic Drill Press and the Steel Dragon Tools 13-piece, 1-3/8-inch cut depth Tungsten Carbide-Tipped annular cutter kit.

This press will attach directly to the metal surface to drill holes quickly and safely. A secured magnetic drill press provides more leverage than a hand drill. The magnet also allows the drill to operate upside down.

MD45 Specs:

Suitable for drilling on any metal surface.

Adjustable base for precision drilling.

Motor: 1200 W, 110 V, 50/60 Hz

Max Magnetic Force: 2,700 lbs. (12,000 N). Thinner metal will result in less force.

Maximum Boring Diameter: 1-3/4 in. (45 mm)

Maximum Boring Depth: 7 in. (180 mm)

Spindle Speed: 0-500 RPM

Spindle Taper: MT2

Includes MT2 to 3/4-inch Weldon Adapter spindle adapter.

Includes MT2 to MT1 converter.

One (1) year warranty against manufacturer defect.

Annular Cutter Features:

Steel Dragon Tools annular cutters drill holes up to ten times faster

Machine-finish hole with no reaming needed when using lubricant.

Make overlapping holes, slotting holes, and edge cuts.

Bit size is etched on each cutter.

Pilot pin helps locate center of hole location and eject slug after drilling is complete.

During the drilling process, the pilot pin will retract into the cutter allowing lubrication to reduce heat gain in the slug.

Annular Cutter Specs:

Bit sizes included: 1/2 in., 9/16 in., 5/8 in., 11/16 in., 3/4 in., 13/16 in., 7/8 in., 15/16 in., 1 in., 1-1/8 in., and 1-1/16 in.

Cutting Depth: 1-3/8 in.

3/4 in. Weldon Shank

Pilot Pin: 3/16 in. x 3 in. (4.74 mm x 77 mm)

Pilot Pin: 1/4 in. x
Steel Dragon Tools MD45 Magnetic Drill Press with 2700 lbs. maximum force.
Includes MT2 to 3/4-inch Weldon Adapter spindle adapter.
Includes MT2 to MT1 converter.
Kit includes six (11) carbide-tipped annular cutters with 1-3/8-inch cut depth and two pilot pins.
Bit sizes included: 1/2 in. to 1-1/16 in.