Super Heavy Duty 5/8″ Keyless Drill Chuck with MT2 Shank for Woodlathe and Pillar drills

Product Description

Drill Chuck Used on the Woodturning Lathe

BMWOOD Super Heavy Duty 5/8″ Drill Chuck with MT2 Shank and Chuck Key for Wood lathe and drill press

Heavy Duty Drill Chuck includes the 5/8″(16mm) drill chuck, #2 Morse Taper Arbor and Jaw Tightening Key.

The drill chuck can be installed on the headstock or tailstock of a lathe that accepts #2MT accessories.

Easily open and close the three chuck jaws using the included chuck key.

Holds drill bits, pen mandrel shafts, small turnings, dowels and workpieces up to 5/8 inch in diameter.

Installs easily with the simple tap of a rubber mallet.

BMWOOD Super Heavy Duty 5/8″ Keyless Drill Chuck with MT2 Shank for Wood lathe and drill press

This precision milled, Large Keyless Chuck with a large diameter knurled body provides plenty of hand torque for tightening.

Quick open and close the three chuck jaws by hand.

The drill chuck can be installed on the headstock or tailstock of a lathe that accepts #2MT accessories.

Holds drill bits, pen mandrel shafts, small turnings, dowels and workpieces up to 5/8 inch in diameter.

Heavy Duty Keyless Drill Chuck includes the 5/8″(16mm) drill chuck,B16 Taper and B16 to #2 MT Adapter
Keyless chuck for quick changes of bits.
The drill chuck can be installed on the headstock or tailstock of a woodturning lathe and pillar drills that accepts MT2 accessories.
Knurled grips and exceptional accuracy make this chuck an indispensable part of any shop.
Holds drill bits, pen mandrel shafts, small turnings, dowels and workpieces up to 5/8 inch in diameter.