Table Inserts (Pack of 2) for 14″ Band saws or Scroll saws（Diameter: 2.5 in, Thickness: 0.1 in.Please Confirm That The Size You Want to Buy is consistent with This Product）
$12.99
Related Products
Product Description
Product Description
Describe:
Table Inserts (pack of 2).
Material: Aluminum
Make sure your insert recess has the locating pin on the side, not on the rear.
use on 14″ Band Saws and 24″ Scroll Saws.2&1/2″ X .100 thick Please measure your saws recess to ensure proper fit. They fit Delta, Rockwell, some Jet, Ridgid, Grizzly, and other imports.
Two inserts to protect your expensive blades
Attention:
Please measure your saw as some Delta & Rockwell &Grizzly14″ bandsaws has slightly smaller holes for the throat plate. If so some slight filing or sanding may be required.If you mind, please don’t buy it.
IMPORTANT INSTALLATION NOTE:
I have sold several hundred of these and occasionally someone will have the problem of it being a bit too large. First make sure the lip of the hole is free from dirt. If a table alignment pin,is not tight or missing,often the blade mounting slot will close up some over time which reduces the insert hole diameter slightly. I tap a flat head screw driver into the blade installation slot a bit to wedge it open. That should spread the insert hole enough for it to fit
Is Discontinued By Manufacturer : No
Product Dimensions : 2.5 x 2.5 x 0.04 inches; 0.32 ounces
Date First Available : October 24, 2018
Manufacturer : KINNG
ASIN : B07PVZCM78
Please measure your saw as some Delta & Rockwell &Grizzly14″ bandsaws has slightly smaller holes for the throat plate. If so some slight filing or sanding may be required.If you mind, please don’t buy it.
Make sure your insert recess has the locating pin on the side, not on the rear.
use on 14″ Band Saws and 24″ Scroll Saws.2&1/2″ X .100 thick Please measure your saws recess to ensure proper fit
They fit Delta, Rockwell, some Jet, Ridgid, Grizzly, and other imports.
IMPORTANT INSTALLATION NOTE:I have sold several hundred of these and occasionally someone will have the problem of it being a bit too large. First make sure the lip of the hole is free from dirt. If a table alignment pin,is not tight or missing,often the blade mounting slot will close up some over time which reduces the insert hole diameter slightly. I tap a flat head screw driver into the blade installation slot a bit to wedge it open. That should spread the insert hole enough for it to fit
Customers say
Customers like the quality of the saw blade insert, saying it’s made from aluminum which is more robust than plastic. They say it will last a long time. However, some customers have reported issues with the thickness, saying the powder coat was too thick and the insert was wider and thicker than advertised. Opinions are mixed on fit.
AI-generated from the text of customer reviews
User Reviews
Be the first to review “Table Inserts (Pack of 2) for 14″ Band saws or Scroll saws（Diameter: 2.5 in, Thickness: 0.1 in.Please Confirm That The Size You Want to Buy is consistent with This Product）”
$12.99
There are no reviews yet.