Urethane Band Saw Tires 9 inch x 1/2 inch x .095 inch 2 Pack for Delta 28-150 BS100 SM400 Craftsman 137.21409 113.24458 315.214770 Grizzly G1052 Black & Decker BDBS100 BS700 Ryobi BS901 ProTech 3203

Phoenix goods Urethane Bandsaw Tires 9″ x 1/2″ x .095″, 2 pack

How to install
First, After disassembling old “tires”, clean up the gummy debris left on the wheels.
Mounting:
Used a clamp to hold the tire on the wheel in one spot, and then used a screwdriver to pry the rest of the tire on. This made installation relatively easy
Uniform stretch:
After mounting, removed the clamp and pushed the shaft of the screwdriver completely under the tire, so it was between the tire and rim. Then ran the screwdriver around the wheel several times to make sure the tire was uniformly stretched around the wheel.
Seating the tire:
Next, made sure the tires were properly seated in the groove on the wheels, rolled the wheel on a concrete floor, pushing down pretty hard with your hands, so the concrete would forced the tire into the groove.
After mounting, reinstalled the wheels and readjusted everything, finish!

✅Urethane band saw tires no adhesive needed, but need to be stretched on. If your new band saw tire is too tight to fit onto the wheel, submerged the new tire under hot water for a few minutes, this will make things easier.

Phoenix goods Urethane Bandsaw Tires 9″ x 1/2″ x .095″, 2 pack, They can be installed on any 9″ band saw that requires a 1/2″ wide and 3/32″ thick tire.
Longer belt life – Made of Urethane, The long-lasting upgrade to rubber belts, Urethane band saw tires most certainly outlast rubber band saw tires and plastic band saw tires. Urethane band saw tires will not dry rot like rubber or plastic tires. This alone provides you with an exceptional value over other types of band saw tires.From improved performance and safety to reduced downtime.
Fast, easy installation –no adhesive is needed for proper installation. Urethane tires are specifically designed to stay in place without any type of adhesive and can be stretched to fit. This makes them even easier to install and even easier to remove if necessary.
9″ x 1/2″ Tire Fits the following machines: Delta 28-150 BS100 SM400 Craftsman 137.21409 137.214130 113.24458 315.214770 Grizzly G1052 Black & Decker BDBS100 BS700 Ryobi BS901 ProTech 3203 Shopfox: W1749, W1750, T20837, Wen 3939T, Also fits for any band saw that needs a 9″ x 1/2″ x .095″ tire.
The surface is specially treated, more slip resistant than others Urethane Band Saw Tire, only Phoenix goods supply, All of this improves blade tracking and extends the life of your blade. urethane tire installation process is quicker and easier for increased productivity and efficiency. And, these tires are bright orange,which makes them super easy to inspectcess is quicker and easier for increased productivity and efficiency.