US STOCK 1500W Magnetic Drill Press with 15000N Magnetic Force 250/450rpm Power Magnetic Electric Drill, Steel Plate Drilling Machines

Product Description

US STOCK Magnetic Drill Press Portable Magnetic Drills & Drilling Machines Electric Magnetic Drilling System

Advantages of Magnetic Drill Press

Self-Protection System.Overload protection and insufficient magnetic force alarm to Stop Work.The Mohs 3# Spindle Can Improve the Rigidity of Spindle and the Drill Bit Works Steadily.Higher Safety.Touch Electronic Panel,Safety Belt and Lock Ring Protect the Operator and Machine.Improve the Factory Production efficiency 30%-300%Adjustable Speed.Adjustable Motor Height,original Gear Box Drive Lubrication System,H7 Precision Transmission Gear. Multi-speed Transmission Doubling Bit Life.Apply to Various Line Velocity and Diameter of the Borehole.Double Dovetail Guide Improves the 5 Time of Hard Wear Resistance.Sliding Bidirectional Makes Motor Height Adjustable Freely According to Different Needs.Auto Internal Cooling System can prolong the service life of the machine.Easy Assembly and Dis-assembly By Plug-in and Plug-out Once.When Sidetracking, a External Lubricating Oil is Adopted.

Reminder:The Voltage is 220V,The Transformer is Needed If You Need 110V.

Electric: 6.8 A for 220V ,if 110V ,the electric is 13.6A

Parameters

Model MD-60 Magnetic Drilling Machine Motor Rated Power 1500W Noload Speed 250/450rpm Tool Holder MT3 Cooling Supply Internal Cooling Voltage AC110V Frequency Range 50-60HZ Magnet Adhesion 15000N Max.Cutting Twist Drill 32mm/1-1/4″ Max Cutting Depth 75mm/3″ Stroke 170mm Magnet Footprint 210*100*45mm Weight 19kg Max.Cutting HSS Annular Cutter 50mm/1-15/16″ Max.Cutting TCT Annular Cutter 60mm(2-3/8″)

About Product

Package

Packing Case 1Cooling Device 1Safety Belt 12.5mm Allen Wrench 15.0mm Allen Wrench 16.0mm Allen Wrench 1Arbor1Instruction Manual 1Magnetic Drill Machine 1

Applicable for Annular Cutters

Applicable for Annular Cutters,TCT Hole Saw,HSS Countersink

Structure

MotorExtremely Wear-Resistant Two-Way Guide RailInternal Self-Lubricating Circulating SystemAutomatic Inner Cooling SystemOpen Handle,More Comfortable to GripSafety Rope Hole,Double ProtectionStrong Magnetic Suction,Safe and Reliable Drilling.

Product Details

Arbor

The Mohs3#Spindle,Improving the rigidity of Spindle,and the Drill Bit Works Steadily.

MULTI-SPEED TRANSMISSION

Select the corresponding velocity

according to the line velocity and

the diameter of the borehole.

DOUBLE DOVETAILGUIDE

Sliding bidirectional guide rail makes

motor height adjusted freely according

to different needs.

MAGNETIC SEAT

Effectively reduce the functional

consumption in the magnetic seat

standby state,ensure the lifetime of

the magnetic seat.

TOUCH ELECTRONIC PANEL

Safe low voltage touch electronic panel switch,both safe and durable

HANDLE

Handles in line with the human engineering is more beautiful and makes the works more simple.

SAFETY BELT

Aerial work safety belt,to prevent life safety accidents caused by sudden power outages in the operational.

LOCK

Prevent the motor from sliding instantly and damage to the drill bit

Product Display

Operation Tips

Locate with pilot pin for the center position marked and marker.Start drilling, you must press annular cutter slowly, make the cutter touch steel plate slowly. After drilling about 1~2mm into steel plate, feed normally. When drilling of a certain hole is about to end, the feed rate should be reduced by 1/3.Annular cutter should always be in the cooling state during cutting. The best cooling method is with cooling device. Flow of coolant is not less than 40cc/min. For those materials which occur a large number of fine powder, such as cast iron, cast copper, coolant may not be used. Instead, compressed air can be used for chip removal.In the Process of Drilling,Use the Cutting Fluid to Act as a coolant to ensure that the processing is cooled fully.Without the cutting field,it will seriously affect the leife of the drill.Pay Atttention whether chips removal is smooth during drilling process,In case of chips stuck or excessive chip winding,withdraw the cutter and remove chip to avoid cutter damage due to squeezing.In case of slug sticking in the inner bore of cutter,to avoid bit blade tap the cutter body with a metallorid bar till the slug drop off.Never use hard objects to tap the edges of teeth which will damage the sharpening edges.

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Customer Reviews

—

—

—

—

5.0 out of 5 stars
1

Price

$599.00$599.00 $1,059.00$1,059.00 $1,759.00$1,759.00 $1,259.00$1,259.00 $1,799.00$1,799.00

Motor Rated Power
1100W 1500W 2500W 600W/1200W 800-3000W

Load Speed
450rpm 250/450rpm 80/125/175/300rpm 0-312r/min@M16 550r/min@M24 200r/min @M30 125rpm/min@M36 50-200r/min@M48 1,Electrode φ4@EDM-8C 1.5,Electrode φ4@ EDM-2000B 2,Electrode φ5@SFX-4000B

Tool Holder
19.05mm(3/4”) MT3 MT4 Tapping Range:M3-M48 Remove M2-M48

Magnetic Force
10000N 15000N 20000N

The Min. Cutter Depth.
10mm 10mm 15mm

Stroke
120mm 170mm 220mm

Motor can Adjust the Height to
95mm 130mm 60mm

Voltage
220V If 110V Need Transformer 220V If 110V Need Transformer 220V If 110V Need Transformer 110/220V According to Your Local Voltage 110/220V According to Your Local Voltage

High Compatibility: Motor Power:1500W.Magnetic Force:15000N Tool Holder:MT3.Tool Holder: 3/4-inch Weldon Shank.Spindle Speed: 250/450 RPM.
High Performance:Max. Cutting Dia. (HSS Annular Cutter): ?50mm(2”).Max. Cutting Dia. (TCT Annular Cutter): ?60mm(2-3/8”).Max. Cutting Depth. (Annular Cutter):75mm(3”).Max. Cutting Dia.(Twist Drill):?31.5mm(1-1/4”).Min. Cutter Depth. 10mm.Stroke: 170mm
Widely Used: Suitable for Steel Structure, Shipbuilding, Equipment Manufacturing, Equipment Installation, Bridge Engineering, Wind Power Generation, Drilling Rig, Electric Power Construction, Railway Manufacturing and Other Fields.
Strong Magnetic Force Magnetic Seat is Effectively Reduce the Functional Consumption in the Magnetic Seat Standby State,ensure the Lifetime of the Magnetic Seat.
Higher Safety.Touch Electronic Panel,Safety Belt and Lock Ring Protect the Operator and Machine. Good Drill Rig Shall Match Favorable Bit Such As Annular Cutter,Hole Saw.Countersink,Step Drill.